Car / 4WD Wireless TPMS (4 Wheels) – Model No TDa-4c

$258.00 (incl. GST)

0 to 80 psi – Car / 4WD Wireless Tyre Pressure & Temperature Monitoring System (TPMS).
Suitable for 4 wheels.
Monitor can run off cigarette lighter or AAA batteries supplied.

Condition: New product

Description

What’s Included in the Kit?

  • wireless sensor scale1 x Receiver unit / monitor
  • 2 x Mounting Options
  • 1 x Car DC Power Adaptor
  • 4 x Wireless Sensors
  • 2 x AAA Batteries
  • CR1632 3V Batteries
  • Anti-theft nuts
  • Relay / Repeater Unit

Why Tyredog™

  • Wireless and Cordless – The wireless sensors and LCD monitor ensures a quick and easy installation
  • Graphic User Interface – The LCD monitor displays both tyre pressure and temperature
  • Battery-Powered – The Sensors and Monitor are both battery powered and can be easily replaced.
  • Light and Compact – Extremely lightweight and compact with specially designed wireless electronic sensors
  • Real Time – High accuracy with real-time tyre pressure and temperature monitoring
  • Adjustable – Fully adjustable tyre pressure and temperature warning ranges.
  • DIY in 3 Minutes – It can be fully installed in around 3 minutes without any technical knowledge

General Features

  • TPMS on dashThe TyreDog TPMS is a DIY system that can be easily installed within minutes.
  • TyreDog has a system for monitoring 2, 4 or 6 – 10 tyres.
  • The 6+ wheels model comes with relay/repeater
  • Simply screw onto the valve stem and lock into place
  • LCD monitor, allows the user to monitor and understand the status of their tyres thus ensuring they are always well maintained
  • Audible/visual alerts when tyre pressure drops below or raises above recommended level.
  • Measure Pressure in PSI, KPA, BAR or KgCM
  • Measure Temperature in Celsius or Fahrenheit
  • High accuracy; detects leakage before harm is done
  • Not affected by bumpy roads
  • Allows user preset value
  • Operates even when the car is stationary
  • Detects both under inflation and over inflation of tyre

Relay / Repeater Unit

  • repeaterSensors are programmed to this Relay which transmits the Information to the Monitor / Receiver in the cabin.
  • This Relay must be mounted outside the vehicle with the distance from Relay to Sensors not exceeding 10 Metres.
  • If using a Trailer, Relay must be mounted to rear of vehicle so the unit still receives a signal once the trailer has been removed.
  • An optional 3-way valve system is available for trucks and buses

td2700a diagram

Wireless Sensors

Additional information

Weight 1 kg

Pin It on Pinterest

Share This