Our caravan hub and wheel bearing temperature sensors are a great safety addition to your iCheckTPMS. The team at iCheck have spent many months and countless hours developing the world’s first TPMS capable of monitoring the hub and wheel bearing temperatures on your caravan.
Working in a similar fashion and together with the TPMS wheel sensors, the bearing sensors send a wireless signal to the monitor inside your car giving real-time and accurate bearing temperatures with visual and audible alarm notifications.
You can now monitor and address any problems that may arise before any damage is done. Offering great peace of mind, your towing travels will be far less stressful knowing your tyre and wheel bearing pressures and temperatures are all operating correctly.
Please note the wheel bearing sensors are only compatible with the iCheckTPMS NextGen monitors. The Hub Temp screen is preset into the monitor and only shows once the hub sensor has been installed ( special adhesive tape onto a flat hub only) and then activated and paired to the NextGen monitor.
- Working Temperature: -30°C ~ 93°C
- Input Voltage/Current: DC 3V
- Frequency: 433.92 MHz
- Transmission Power: <10 dBm
- Temperature Accuracy: ± 3°C
- Size (LxWxH): 30x24x15mm
- Weight: 11g
- Battery Life: 18-24 Months
- Replaceable Battery: No
The bearing sensors need to be activated and paired to the monitor prior to installation. Refer to your user manual for more information.
The sensors need to be installed ( adhesive tape) onto a flat bearing dust cap surface. If you have curved, or raised lettering on your dust caps, it’s advised to change them to a flat type and are easily found at your local trailer or caravan store.
Some wheel types have centre caps that can be removed without having to remove the wheel from the caravan whilst some other wheel types may need to be removed to get access to the wheel bearing dust caps for the installation of the sensor.